Thanks for the feedback. Meanwhile I'm happy with StarterWare from TI. On Thu, Feb 20, 2014 at 3:12 PM, Elavarasu <[email protected]> wrote: > Hi, > > There is a way to do baremetal with x-loader as a startup..without the > emulator. > > This link will provide the idea.. > > http://beagleboard.lohray.com/vm-larix/bare-metal-hello-world > > > -- > Elavarasu. > > > On Saturday, October 19, 2013 7:29:24 PM UTC+5:30, Satz Klauer wrote: >> >> Hi, >> >> I plan to do some bare-metal programming with the BBB (mainly for personal >> reasons and to play with hard realtime environments, so please do not try to >> soften me up to use Linux ;-) >> >> As a first task and to get a feeling for the hardware I'd try to access >> the LEDs (configure the GPIOs they are connected with as digital output and >> write 0/1 to them). >> >> My question: is there a getting-started-guide for this? >> >> Or to go more in detail: >> >> - I already found the CPU manual at TI's pages >> - I found a compiler arm-none-eabi-gcc - is it the correct one? >> - I still need header files where register addresses for the CPU are >> predefined >> - I still need a description how to download my created binaries to the >> board so that they are started immediately (instead of the Linux-Distro) >> >> Any Ideas where I can find these things? >> >> Thanks! >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/gm_GPuYtCCY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out.
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
