We are developing a board based on the TI AM3358 processor and we are using the Beaglebone Black as a development test platform prior to the real hardware becoming available. Our system will have eMMC memory but no microSD card so we intend to do a boot/install via the USB or serial port. We are testing this out using the Beaglebone Black but it is not working. We can boot our own Linux from the microSD card by powering up with the S2 boot button pressed fine. However if we power up (via a USB-B cable) without a microSD card and the S2 boot button pressed the BBB does not seem to try and boot via the USB or serial. Our host is Linux and a "lsusb" shows no new devices (We were expecting an Ethernet gadget device). Minicom or a raw serial port program connected to UART0 shows no ASIC id (what ever that is) being sent. Any ideas ?
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
