insert into uEnv.txt file and reboot optargs=quiet drm.debug=7 capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN capemgr.enable_partno=BB-SPI1-01
Make sure it is enabled. ls -al /dev/spidev1.* ref. http://elinux.org/BeagleBone_Black_Enable_SPIDEV#Enabling_SPIDEV_with_Cape_Manager 2013년 9월 19일 목요일 오후 8시 27분 40초 UTC+9, [email protected] 님의 말: > > Hello all. > > i have followed several how-to's to init and enable the SPI on beaglebone > black! > init and use is no problem .. > > but after the reset the device is not present.. > > i have modified the "uEnv.txt" .. > > but no spi dev after boot up .. > > i have to manual get it with this "echo BB... > > /sys/devices/bone_capemgr.*/slots" command.. > > someone else had the same problem? > > i think its just a little think.. but what and where? =) > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
