Good afternoon :) I am following a post by Bruce which has been terminated:
I installed the latest image Angstrom Distribution (BeagleBone Black - 2GB eMMC) 2013-09-04 from https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz and installed it on my shinny new BBB, I waited for the 4 LEDs to go solid then I removed the SD card and booted it. When I SSH in, it reports the version as: root@beaglebone:~# cat /etc/angstrom-version Angstrom v2012.12 (Core edition) Built from branch: angstrom-staging-yocto1.3 Revision: 2ac8ed60f1c4152577f334b223b9203f57ed1722 Target system: arm-angstrom-linux-gnueabi As well, when I do opkg update/opkg upgrade, it seems to be pulling packages from V2012.12 feed rather than V2013.12 feed. Is this expected? Did I make a mistake somewhere? Did the new image really get burned to eMMC? Thanks, Bruce I am sure bruce was a methodical as I have been yet I have the same persistent problem... ID.txt on my SD card: BeagleBone Black eMMC flasher 2013.09.04 The image file on my pC used to create the image on the SD card is: BBB-eMMC-flasher-2013.09.04.img I cannot see what I am doing incorrectly, any assistance would be most welcome. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
