Replacing with a larger part will increase the cost and void all POs in place. There are no smaller parts than 2GB. Not taking into consideration the fact that SW would not fit in a smaller part.
We have been doing this for six years now and have a pretty good idea how to do this. We are working through it as quickly as we can. It is going to take time. All the tricks are being employed to get boards out.. Gerald On Sun, Feb 23, 2014 at 9:57 PM, rh_ <[email protected]> wrote: > On Fri, 21 Feb 2014 18:33:12 -0600 > Gerald Coley <[email protected]> wrote: > > > eMMC for one. Schedules are extended out. You have some we can buy? > > Some of the crystals as well. > > Kind of a critical part. I don't know anything about them other than the > basics. Is it possible to replace with a larger-sized part? Of course > charging > more for the BBB. Or selling a BBB without an eMMC? It can then boot > from mSD or USB or UART or ethernet. It seems to me that a lot of > people are not running from eMMC since it's got a limited lifetime > (although a pretty long one if you minimize writing). > > Or a smaller part for same money? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
