Hi! this system on module has BBB schematics except for eMMC is changed to SLC NAND and is fully qualified for -40 +85 applications. This product is very popular by Russian OEMs, so you could design your application based on this module. Focus on SW, not HW bugs :) http://www.mentorel.com/product/usomiq-am335x/
2014-02-25 6:45 GMT+04:00 <[email protected]>: > That will not be an issue. With QNX and Sedona having such small > footprints and small resource requirements, I see JAVA being the biggest > hog. This OS and software setup will run lightyears ahead of other > controllers I will be putting it against. > > > > On Monday, February 24, 2014 9:26:56 PM UTC-5, liyaoshi wrote: > >> How much benchmark do you expect ? >> >> >> >> 2014-02-25 10:12 GMT+08:00 <[email protected]>: >> >> This will be a headless device. There may be some web based configuration >>> wizard for some functions, but no display support is needed. >>> >>> >>> On Monday, February 24, 2014 8:50:23 PM UTC-5, liyaoshi wrote: >>> >>>> Can I ask >>>> How do you get the graphic work on BBB board within QNX ? >>>> just curious , >>>> As I know , QNX close io-display support on this board , almost graphic >>>> architecture will move to screen ,but its not opensource . >>>> >>>> regards >>>> >>>> >>>> 2014-02-25 7:59 GMT+08:00 <[email protected]>: >>>> >>>>> I am looking to hire someone for software development. I am designing >>>>> an industrial controller based on the BeagleBone Black >>>>> single-board-computer. I need a full disk image created that includes the >>>>> operating system and software that will run on it. I will be designing >>>>> hardware accordingly. >>>>> >>>>> - BeagleBone Black single-board-computer to boot QNX operating system >>>>> from onboard flash memory. >>>>> - Ethernet interface set to fixed IP and subnet. >>>>> - Sedona Framework initialized after boot. >>>>> >>>>> I have the QNX and U-Boot images. >>>>> Sedona requires JAVA. I have of a copy of the JRE files from a similar >>>>> device that may be used. >>>>> Sedona will need to access GPIO on the BeagleBone for analog and >>>>> digital inputs and outputs. >>>>> I will ultimately need a MicroSD card image used to flash the >>>>> BeagleBone so it boots stand-alone - no SD card. >>>>> >>>>> Other items down the road will include RS232/RS485, LCD, remote IO, >>>>> etc. >>>>> >>>>> If you are interested, please look at these sites for more information >>>>> and then we can discuss further. >>>>> >>>>> http://www.qnx.com/ >>>>> http://www.beagleboard.org/ >>>>> http://www.sedonadev.org/ >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- LinkedIn - http://www.linkedin.com/in/maximpodbereznyy Company - http://www.linkedin.com/company/mentorel Facebook - https://www.facebook.com/mentorel.company -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
