Accoding to your guidelines i downloaded the source from following webpage http://downloads.ti.com/sitara_android/esd/TI_Android_DevKit/TI_Android_JB_4_2_2_DevKit_4_1_1/index_FDS.html
and downloaded source link from there http://downloads.ti.com/sitara_android/esd/TI_Android_DevKit/TI_Android_JB_4_2_2_DevKit_4_1_1/exports/TI_Android_JB_4.2.2_DevKit_4.1.1.bin the source successfully gets executed and a directory is created in same folder. > > chmod a+x [filename] > > in a terminal, or by right-clicking on the file in nautilus and going to > properties>permissions> and check "allow executing fils as program". Then > open up a terminal, and cd to the directory you saved the file to, and type > in the name of the file to execute it. This will bring up a user > agreement, you must scroll to the bottom by pressing enter to scroll to the > next line, then type "I ACCEPT" at the end. Careful, if you scroll too > fast, you will be pressing enter when the "I ACCEPT" prompt comes up and > the terminal will exit without doing anything. After you type "I ACCEPT" > and press enter, the downloader will start and you will find your source > directory in the same directory you downloaded your file to. > But when i open the created folder its empty so I am unable to navigate to th said folder. I am working on beaglebone and will be using SPI interface. I will be workin on android. > After you have the source navigate to /kernel/Documentation/ and you will > see directories for ACPI, SPI, I2C, etc, (I dont see directories for PWM or > GPIO but there is a gpio.txt and pwm.txt that seem to have the information > for those interfaces, respectively). For SPI the file you want appears to > be /kernel/Documentation/spi/spi-summary. > > hope this helps... > > <https://lh4.googleusercontent.com/-908Hx3_H8Z8/UwwmbZkKwcI/AAAAAAAAAHE/5DrHKGu4iy8/s1600/post2.JPG> Please do provide a feedback on the same I have attached the image of the open directory below <https://lh5.googleusercontent.com/-2dnJzN_Y_Pg/UwwmFAvsfQI/AAAAAAAAAG8/1_RKuV204kM/s1600/post.JPG> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
