On Wed, Feb 26, 2014 at 9:25 AM, <[email protected]> wrote: > I can now confirm that my PCB supplier has now successfully fitted > connectors P8, P8 and I have taken delivery of my first-off sample. > Gerald, are you able to point me to some instructions on how I get my > "virgin" beagleboardblack up and running? > I have tried using an SD card with a known good android image but this does > not work, the error I get from hyperterminal is: > > U-Boot SPL 2011.09 (Nov 27 2013 - 10:43:10) > > Chipsee AM335x EVM Board > > Incorrect magic number in EEPROM > > read_eeprom() failure. continuing with ddr3 > > OMAP SD/MMC: 0 > > mmc_send_cmd: timedout waiting for cmddis! > > ** Can't read from device 0 ** > > spl: fat register err - -1 > > ### ERROR ### Please RESET the board ### > > I'm not surprised that it doesn't yet work because there must be some > programming/setup to be done on the board itself before it will operate and > this hasn't yet been done. > > I think I may have to program the E2..? > > Could you help me with that procedure please?
As long as it's 100% compatible with the beaglebone black, including the on-board eeprom, memory, 1Ghz, etc. eeprom: Make sure the write protect is off and boot with this image. http://rcn-ee.net/deb/testing/2014-02-24/BBB-blank-eMMC-flasher-debian-7.4-2014-02-24-2gb.img.xz Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
