Am 27.02.2014 17:29, schrieb Gerald Coley: > The factory image does enable HDMI by default. Sounds like it does not like > your monitor. > > http://www.elinux.org/Beagleboard:BeagleBoneBlack_HDMI > > For flashing questions > > http://www.elinux.org/Beagleboard:Updating_The_Software > > Gerald
I tried every think i could find inkluding access the board via USB nothing worked except booting from SDcard. For me it seems that the EEProm is brocken. I guess i will give it back. note: when i boot from SDcard HDMI and friends work fine re, wh > > > On Thu, Feb 27, 2014 at 10:25 AM, walter harms <[email protected]> wrote: > >> hi list, >> i have a new BB Black and got a boot probelm even before i could start >> playing with the hardware. >> >> 1. The factory image does not enable HDMI or so so i have no output at all >> >> 2. I tried to install a new image and wrote the >> BBB-eMMC-flasher-2013.09.04.img >> to a SDcard >> 2a. i tried to flash, via pressing S2 -> nothing happens >> >> 3. BUT The system is booting from SDcard fine >> >> Anyone an idea what is going on ? >> >> re, >> wh >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
