From: Nizar A Rasheed <[email protected]> Reply-To: <[email protected]> Date: Sunday, February 2, 2014 at 3:14 AM To: <[email protected]> Subject: [beagleboard] BEAGLEBONE BLACK Device tree overlay changing parameters not affecting
> > Hello All, > > In my BBB, I have connected a custom Audio-cape(based on BBB Audio cape), and > is working fine.I used BB-BONE-AUDI-01-00A0.dts to get my sound card added. > > But what ever changes I am making in the BB-BONE-AUDI-01-00A0.dts is not > affecting at all. > > For eg :- the serial-dir fragment under fragment4 of BB-BONE-AUDI-01-00A0.dts > , I made all entries as 0 as given below, and I recompiled and loaded. > > serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ > 0 0 0 0 > 0 0 0 0 > 0 0 0 0 > 0 0 0 0 >> >; > > > But still the cape is working fine.Why it is not affecting at all ? Hi Nizar, Did you ever resolve this problem? I¹m facing a similar problem in that I can capture audio, but my playback does not work. I¹m using axr2 for capture and axr0 for playback. Regards, John > > > Any helps appreciated ... > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
