This is, if you're booting off the eMMC. However, if I recall correctly you are, or were wanting to boot from an external USB hdd. So this uEnv.txt file on the sdcard would have to have that information in it.
On Sat, Mar 1, 2014 at 7:56 PM, William Hermans <[email protected]> wrote: > You need to have a uEnv.txt file on the sdcard with somethign like this in > it > > mmcdev=1 > bootpart=1:2 > mmcroot=/dev/mmcblk1p2 ro > > > > > On Sat, Mar 1, 2014 at 6:04 AM, Eric Palmer <[email protected]> wrote: > >> I want to use a blank sd card for extra rotfs storage (if possible) on >> the BBB. I see a lot of instructions for how to do this when you boot from >> the sd card but not just using a blank card and booting off the BBB. >> >> Debian Wheezy 7.2 OS >> >> I have a card formatted and partitioned but it seems that the BBB wants >> to boot form that card. Because when Installed and then I reboot I can't >> get a ssh prompt. >> >> thanks >> >> >> -- >> Eric Palmer >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
