As is indicated in the System Reference Manual, you can use the LCD pins as GPIO pins. Provided, you don't interfere with their settings during power up as they are also the boot pins.
Gerald On Sun, Mar 2, 2014 at 1:32 PM, <[email protected]> wrote: > Hi, > > I would like to configure BBB P8 with 16 (2 rows of 8) GPIO pins next to > each other. They just need to be able to be set to high or low. I see P7 > through P18 but I need 4 more. I am not using any LCD screen. Is it > possible to reconfigure the pins? I am a BBB newbie and would appreciate > any help so I don't mess anything up. > > Thanks > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
