Schematics have been known to be more wrong that datasheets. Schematics often lag in updates, especially once a product is in production and even more so when it's open source or other 'labor of love.'
-david On Mon, Mar 10, 2014 at 6:21 AM, <[email protected]> wrote: > I am integrating the 74AVC32T245 device into my design. > I have spotted a discrepancy between the pin out shown on the schematic > for the LCD7 cape (document number BBT-BONE-LCD7-01, REVA3) and the pinout > according to the datasheet. > > The schematic shows: > H1 as 2B8 > H2 as 2B7 > The Texas instruments datasheet shows: > H1 as 2B7 > H2 as 2B8 > > Pins T1, T2 are also similarly swapped. > > Does anyone know which is correct? > > Normally I would go with the datasheet but I assume the LCD7 cape does > work... > > Thanks in advance... > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
