Op woensdag 12 maart 2014 10:19:05 UTC+1 schreef Tsan-Ming Chou: > > As far as I know, it is. You should put your application on microSD card > first without the hassel of adding an additional NAND chip. The bootloader > came with Starterware is almost read-to-use and supports MMC/uSD file > system. The drivers are already there.You do not need to write you own. You > need to get used to how to "flash" your application and boot loader on > microSD card. > > Is it possible to flash everything on the eMMC ? So my starterware can > boot from the eMMC? > > 2014-03-12 17:07 GMT+08:00 Lukas Van Iseghem > <[email protected]<javascript:> > >: > >> Thank you, >> >> it says beaglebone does not support NAND. Is this still true for the >> beagle bone black? >> >> Op woensdag 12 maart 2014 09:48:26 UTC+1 schreef Tsan-Ming Chou: >>> >>> For bare-metal programming on TI's AM335x, you need STARTERWARE-AM335X ( >>> http://www.ti.com/tool/starterware-sitara). You need a boot loader no >>> matter which ROM-type memory you are going to use (NOR/NAND Flash, MMC/SD, >>> etc.). Please read the documentations came with Starterware. >>> >>> Tsan-Ming >>> >>> >>> >>> 2014-03-12 16:31 GMT+08:00 Lukas Van Iseghem <[email protected]>: >>> >>>> Hello, >>>> >>>> for an application I'm developing it is required that I remove the >>>> linux OS on the processor (please don't question this part, this is >>>> required). I'm trying to find some documentation on programming the sitara >>>> AM3358 but I don't find what I'm looking for. >>>> >>>> How do I load my code on the processor when there are no linux drivers >>>> to communicate with the processor? >>>> >>>> I was thinking about using the serial port, but then my mentor >>>> suggested something like JTAG. The problem with JTAG is that I don't have >>>> an emulator and we're not buying one either. >>>> >>>> Just to be clear: no need to debug with JTAG, only to load the >>>> necessary files to the AM3358, that makes it execute the code. >>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
