Sorry, I should have said that I'd tried cpuinfo. I can change the governor (with -g), but not the frequency:
tuppence ~ # cpufreq-set -f 1000MHz tuppence ~ # cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to [email protected], please. analyzing CPU 0: driver: generic_cpu0 CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 300 us. hardware limits: 300 MHz - 1000 MHz available frequency steps: 300 MHz, 600 MHz, 800 MHz, 1000 MHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 300 MHz and 1000 MHz. The governor "userspace" may decide which speed to use within this range. current CPU frequency is 550 MHz (asserted by call to hardware). cpufreq stats: 300 MHz:nan%, 600 MHz:nan%, 800 MHz:nan%, 1000 MHz:nan% tuppence ~ # Whatever happens, the frequency stays at 550 MHz. All ideas welcome - Will -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
