Hello trknclinton92, Which steps are you referring, specifically? On Mar 17, 2014 6:35 AM, <[email protected]> wrote:
> Dear forum, > This link resolves this issue: > https://groups.google.com/forum/#!msg/beagleboard/G_QjWvBNXvc/eS1MwhzxBWIJ > > I had exactly all the issues that most of you had, but after following the > steps on the link everything works. You don't even need to reflash you > board or anything > This discussion can finally be marked closed. > > Cheers. > > On Thursday, June 20, 2013 11:31:44 PM UTC-5, Richard Pesce wrote: >> >> Hello all! >> >> I recently received my Beaglebone Black. I followed the getting started >> guide HERE <http://beagleboard.org/Getting%20Started>, installed the >> drivers. Afterwards I was able to connect to http://192.168.7.2 and use >> cloud9 etc. >> >> I got to the "Update board with latest software" portion and downloaded >> BBB-eMMC-flasher-2013.06.06.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.06.img.xz> >> and >> flashed the eMMC successfully. I removed the power, ejected the uSD and >> then connected to the computer via USB and the BBB wouldn't mount as a USB >> drive. Fearing the update failed, I tried again with the same image. That >> failed... so I tried >> BBB-eMMC-flasher-2013.06.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.20.img.xz> >> from >> HERE<http://circuitco.com/support/index.php?title=Updating_The_Software> and >> flashed again... still no USB drive. I then tried BBB-eMMC-flasher-2013. >> 06.17.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/BBB-eMMC-flasher-2013.06.17.img.xz> >> from HERE <http://downloads.angstrom-distribution.org/demo/beaglebone/>... >> still no USB drive. In a last ditch effort I tried (Current Production >> Image) >> BBB-eMMC-flasher-2013.05.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.05.20.img.xz> >> from >> HERE<http://circuitco.com/support/index.php?title=Updating_The_Software>... >> still no USB drive. >> >> >> LINUX: >> It is important to note that I could SSH into all of these installs (not >> at http://192.168.7.2 though), and verified that everything worked.... >> I can see /dev/mmcblk0p1 is mounted at /media/BEAGLEBONE (with my most >> current flash) and all the files are present. >> >> WINDOWS: >> I searched in device manager and could not see the BBB at all or any >> unknown or not working hardware. And in computer management/Disk >> management there isn't anything present. >> >> I have attempted other computers (WIN7) and multiple USB ports.... same >> issue, >> >> >> Anyone have any suggestions? I'm sure I am missing something obvious. >> >> >> Thank you in advance! >> >> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/Fz64scAbfwo/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
