On Tue, Mar 25, 2014 at 4:25 AM, <volcanov...@gmail.com> wrote: > Hello, > > I had connected a USB camera to the beagle XM board running Linux 3.4.7-x1 > and it worked successfully( tested with camorama application). > As I was facing issues with USB mounted on the beagleboard at low > temperatures, I applied the patch > https://github.com/RobertCNelson/stable-kernel/blob/v3.4.x/patches/omap_fixes/0001-Fix-sprz319-erratum-2.1.patch > After applying the patch, the board works fine at low temperatures but the > USB camera output flickers using the camorama application.
"low temperatures" aka lower then what the board is spec'd for? I'm not supporting that. > Camera details(lsusb output) > Bus 001 Device 005: ID 058f:5608 Alcor Micro Corp. > > Dmesg output for video > dmesg | grep video > [ 8.462341] Linux video capture interface: v2.00 > [ 8.616485] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (058f:5608) > [ 8.680419] usbcore: registered new interface driver uvcvideo > > Any pointers will be appreciated. Grab the latest, lots of usb fixes, 3.4.x is ancient.. http://elinux.org/BeagleBoardDebian#BeagleBoard_xM Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
