Can anyone let me know what register should I use for this? I just tried to read following register value
0x44E0D000 where REVISION (12.5.1.1 of TRM) register is. But without slotting BB_ADC to capemgr, what I've got is following error: Unhandled fault: external abort on non-linefetch (0x1018) at 0xb6f11000 This kind of error, I have experienced with GPIO3 register and I found that turning on clock using CM_PER_GPIO3_CLKCTRL(8.1.12.1.31 of TRM) solves. However I cannot figure out what register should I turn on, I've tried with CM_WKUP_ADC_TSC_CLKCTRL but it does not solve my problem. Thanks in advance. PS) Sorry for reposting, I have not assigned board before. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.