Hello Friends,
I am using beaglebone black with kernel 3.8.13-00726-g023e57d-dirty on the board. I am facing issue of udev not receiving the events from Ethernet driver. I tried to monitor the udev events using command : *root@beaglebone:~# udevadm monitor* monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent [ 2763.754848] libphy: 4a101000.mdio:00 - Link is Down [ 2767.973869] libphy: 4a101000.mdio:00 - Link is Up - 100/Full *//NO UDEV Events noticed disconnecting/connecting Ethernet 0* When I do plug/unplug the USB mass storgage I got lots of messages with udev events including action = add/remove. But with ethernet plugging/unplugging, I am not getting any messages. I have also tried to find in the driver source under linux/driver/net/ethernet/ but couldnt able to find any api used to send uevent via kobject. Any comments on how to enable the udev events for Ethernet driver? Regards, Ankur -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
