When i started runing openocd with
openocd -f tcl/interface/ngxtech.cfg -f tcl/board/ti_beagleboard_xm.cfg -c
init -c "reset init"
'Open On-Chip Debugger 0.7.0 (2014-01-23-19:22)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 10 kHz
Warn : dm37x.dsp: huge IR length 38
trst_only separate trst_push_pull
Info : clock speed 10 kHz
Info : JTAG tap: dm37x.jrc tap/device found: 0xfff9cd17 (mfg: 0x68b, part:
0xff9c, ver: 0xf)
Warn : JTAG tap: dm37x.jrc UNEXPECTED: 0xfff9cd17 (mfg: 0x68b, part:
0xff9c, ver: 0xf)
Error: JTAG tap: dm37x.jrc expected 1 of 3: 0x2b89102f (mfg: 0x017, part:
0xb891, ver: 0x2)
Error: JTAG tap: dm37x.jrc expected 2 of 3: 0x1b89102f (mfg: 0x017, part:
0xb891, ver: 0x1)
Error: JTAG tap: dm37x.jrc expected 3 of 3: 0x0b89102f (mfg: 0x017, part:
0xb891, ver: 0x0)
Error: Trying to use configured scan chain anyway...
Error: dm37x.jrc: IR capture error; saw 0x31 not 0x01
Warn : Bypassing JTAG setup events due to errors
adapter speed: 10 kHz
Info : JTAG tap: dm37x.jrc tap/device found: 0xfff3aa17 (mfg: 0x50b, part:
0xff3a, ver: 0xf)
Warn : JTAG tap: dm37x.jrc UNEXPECTED: 0xfff3aa17 (mfg: 0x50b, part:
0xff3a, ver: 0xf)
Error: JTAG tap: dm37x.jrc expected 1 of 3: 0x2b89102f (mfg: 0x017, part:
0xb891, ver: 0x2)
Error: JTAG tap: dm37x.jrc expected 2 of 3: 0x1b89102f (mfg: 0x017, part:
0xb891, ver: 0x1)
Error: JTAG tap: dm37x.jrc expected 3 of 3: 0x0b89102f (mfg: 0x017, part:
0xb891, ver: 0x0)
Error: Trying to use configured scan chain anyway...
Error: dm37x.jrc: IR capture error; saw 0x39 not 0x01
Warn : Bypassing JTAG setup events due to errors
DEPRECATED! use 'cortex_a' not 'cortex_a8'
Error: target not examined yet
Runtime Error: embedded:startup.tcl:378:
in procedure 'amdm37x_dbginit'
in procedure 'cortex_a8' called at file
"/usr/local/share/openocd/scripts/target/amdm37x.cfg", line 203
in procedure 'cortex_a' called at file "embedded:startup.tcl", line 378
getting Hanged over here........
i have started gdb on the other tab....
Info : accepting 'gdb' connection from 3333
DEPRECATED! use 'cortex_a' not 'cortex_a8'
Error: target not examined yet
Runtime Error: embedded:startup.tcl:378:
in procedure 'amdm37x_dbginit'
in procedure 'cortex_a8' called at file
"/usr/local/share/openocd/scripts/target/amdm37x.cfg", line 203
in procedure 'cortex_a' called at file "embedded:startup.tcl", line 378
Warn : acknowledgment received, but no packet pending
undefined debug reason 6 - target needs reset
Segmentation fault (core dumped)
could any one help me in this regard or an idea.....!!!
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
