One more note. Make sure you are using the flasher version. There are two different versions on that page.
Gerald On Thu, Apr 3, 2014 at 7:42 PM, Gerald Coley <ger...@beagleboard.org> wrote: > Are you holding the boot button down when you power on the board? > > Gerald > > > > On Thu, Apr 3, 2014 at 7:30 PM, <david.erd...@gmail.com> wrote: > >> I had a previous distro on the beaglebone black. However I can no longer >> access it (not sure what I did) so I downloaded the BeagleBone Black (eMMC >> flasher) from http://beagleboard.org/latest-images/ and wrote it to the >> sd card. >> I hold the button until all leds light up to copy debian to the emmc. >> Twice now I have let it go about an hour but it seems like it never works. >> The 2nd and 4th LED show lots of activity (USR0 and USR2) but I never get >> to the solid 4 solid leds. If I hook up an Ethernet cable I can ssh into >> the beaglebone. But once I remove the card I cannot. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
