If it works and then goes away, most likely the board went into sleep mode due to inactivity on the keyboard.
Gerald On Sat, Apr 5, 2014 at 12:48 AM, <[email protected]> wrote: > Hi, > > I'm brand new to Beagle, and I know there is a lot on BBB & HDMI issues, > but I have not seen anything like this. I plugged in my BBB for the first > time today. I'm using a brand new, good quality HDMI cable and a 5V ps @ > 1.5A. I had BBB running with my Visio on HDMI 2 for about an hour. Then, > all the sudden the video signal drops. I move my cable box to HDMI 2 and > there is video, so the TV HDMI is OK. I move BBB to HDMI 3 and same > problem. I did get it to come back after cycling power on the TV and BBB, > but it quit after a few seconds. That only worked once too. Are there TV > or BBB settings that will make the HDMI more stable? > > Thanks! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
