On Wed, Apr 9, 2014 at 3:17 AM, <ibinsdaha...@gmail.com> wrote: > Hi, > > I have a normal white BeagleBone with Debian and I'm trying to show a USB > mass storage, which is connected to the BB, as mass storage, if I connect > the BB to a PC. > At the moment, if I connect it to a PC, there is only a small part of the BB > shown as mass storage (/boot/uboot/). This part has only about 80 mb. My aim > is to show a on the BB mounted USB mass storage on the PC. > > I already managed to mount the USB device on the BB, than mount an image on > the device an show this image under a linux distribution. If I do the same > with a windows PC, it fails to install the drivers and nothing is shown. > > And there is another problem: I don't have admin rights so I'm not allowed > to install any software or drivers because it's a PC from my company. On the > BB I could do everything. > > Can somebody please help me or give some advice?
The "partition" shown over the usb interface is defined in: /opt/scripts/boot/am335x_evm.sh https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L71 "file=${gadget_partition}" So if you want to pass a usb flash drive, use: file=/dev/sda1 Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.