I have no plans to make any such boards. I have all I can handle withe new board under development.
Gerald On Mon, Apr 14, 2014 at 9:28 PM, BBQTrader <[email protected]> wrote: > Gerald, > > I'm working on a Home Automation/Security System project, and am > developing it for the BBB. I expect it to sit in a box for a long time, > connected to the network, and connected to various sensors. > > I would like to have a board that had physical terminals on it rather than > the headers, since this would work better for long term projects such as a > networked home security system. > > It occurred to me that a board like this may shift some of the demand for > the BBB for those that have either production or long-term projects such as > mine, and would also justify an increase in cost where it would make it > more available. > > So, I'm suggesting two boards - one targeted at the initial > learning/development phase (the current BBB with headers), and another new > board with screw-terminal connectors for longer implementation projects > (BBB w/Terms). The new board would be physically larger to handle the > terminals, but by placing them on the outer edge of the new board, I would > hope the routing from the headers to the terminals could be a simple update > to the layout, keeping the interior of the board unchanged. > > Thanks, > > BBQ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
