Does someone have an idea about it? 18 Nisan 2014 Cuma 09:15:39 UTC+3 tarihinde Eren Basturk yazdı: > > Hi All, > > I would like to say my problem, I would like to write some code for PRU > units for that reason I enabled PRU on BBB and I run prepared examples on > BBB. > > But I don't know how can I create a project and compile. > > for example there is a software below but I don't know how can I complie > it and how can I run it? > > > #define GPIO1 0x4804c000 #define GPIO_CLEARDATAOUT 0x190 #define > GPIO_SETDATAOUT 0x194 MOV r1, 10 BLINK: MOV r2, 7<<22 MOV r3, GPIO1 | > GPIO_SETDATAOUT SBBO r2, r3, 0, 4 MOV r0, 0x00a00000 DELAY: SUB r0, r0, 1 > QBNE DELAY, r0, 0 MOV r2, 7<<22 MOV r3, GPIO1 | GPIO_CLEARDATAOUT SBBO r2, > r3, 0, 4 MOV r0, 0x00a00000 DELAY2: SUB r0, r0, 1 QBNE DELAY2, r0, 0 SUB > r1, r1, 1 QBNE BLINK, r1, 0 > > > > It is possible could you give some information about it? > > Best Regards, > Eren Basturk >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
