I'm using a 4GB SD card. I tried to delete the 4th partition with no success. Then I did again the full procedure from the beginning (a second time) and surprisingly now it works ! I probably missed (the first 2 times) one step in the procedure ...
Thanks a lot for your support. Le mercredi 23 avril 2014 19:22:55 UTC+2, Andrew Henderson a écrit : > > It appears that one of your partitions is not properly mounting, hence the > failure of all of the daemons to start. The launch scripts are trying to > start everything, but since the files aren't there, nothing is going to be > able to start. Are you using a microSD card bigger than 4GB? This might > be of some help to you: > https://groups.google.com/forum/?fromgroups=#!category-topic/beagleboard/android/kx43JkGPDkA > > Andrew > > On Wednesday, April 23, 2014 11:40:46 AM UTC-4, jeremy geslin wrote: >> >> >> Thanks a lot for this great job ! >> >> I was able to flash the compiled image on SD card and to boot my BBB on >> android without too much trouble (I only faced display resolution issue >> with my DVI display). >> But now I'm fighting to replicate the same from the compilation stage. I >> followed step by step your instructions ( >> http://icculus.org/~hendersa/android/), by the way really well described >> since I'm far away to be an expert in this area, and I succeed to build the >> image and fashed it on SD card. >> Unfortunately, the android boot doesn't complete. On the display, I first >> get the Linux icon (penguin) in the top left side, then "ANDROID" text >> appears endlessly. I never reach the step when android icon is displayed. >> >> Here is what I observe on the debug port (last part): >> >> [ 2.510219] mmc1: BKOPS_EN bit is not set >> [ 2.517157] mmc1: new high speed MMC card at address 0001 >> [ 2.523620] mmcblk1: mmc1:0001 MMC02G 1.78 GiB >> [ 2.528784] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB >> [ 2.535639] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB >> [ 2.544012] mmcblk1: p1 p2 >> [ 2.549817] mmcblk1boot1: unknown partition table >> [ 2.557000] mmcblk1boot0: unknown partition table >> [ 2.589896] tilcdc 4830e000.fb: found TDA19988 >> [ 2.595354] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [ 2.602322] [drm] No driver support for vblank timestamp query. >> [ 2.701590] Console: switching to colour frame buffer device 160x64 >> [ 2.728743] tilcdc 4830e000.fb: fb0: frame buffer device >> [ 2.734413] tilcdc 4830e000.fb: registered panic notifier >> [ 2.740104] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 >> [ 2.795760] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 >> [ 2.802176] davinci_mdio 4a101000.mdio: detected phy mask fffffffe >> [ 2.809819] libphy: 4a101000.mdio: probed >> [ 2.814090] davinci_mdio 4a101000.mdio: phy[0]: device >> 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 >> [ 2.823943] Detected MACID = 90:59:af:49:d2:c1 >> [ 2.828598] cpsw 4a100000.ethernet: NAPI disabled >> [ 2.835754] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 >> 00:00:01 UTC (946684801) >> [ 2.897265] tilcdc 4830e000.fb: timeout waiting for framedone >> [ 2.915299] ALSA device list: >> [ 2.918443] #0: TI BeagleBone Black >> [ 5.700344] EXT4-fs (mmcblk0p2): recovery complete >> [ 5.712806] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data >> mode. Opts: (null) >> [ 5.721334] VFS: Mounted root (ext4 filesystem) on device 179:2. >> [ 5.730288] devtmpfs: mounted >> [ 5.733724] Freeing init memory: 236K >> [ 5.771806] init (1): /proc/1/oom_adj is deprecated, please use >> /proc/1/oom_score_adj instead. >> [ 5.896375] init: cannot open '/initlogo.rle' >> [ 9.427979] EXT4-fs (mmcblk0p3): recovery complete >> [ 10.102043] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data >> mode. Opts: nomblk_io_submit,errors=panic >> [ 10.149532] init: cannot find '/system/bin/vold', disabling 'vold' >> [ 10.157261] init: cannot find '/system/bin/sgx/rc.pvr', disabling 'pvr' >> [ 10.164888] init: cannot find '/system/bin/netd', disabling 'netd' >> [ 10.172136] init: cannot find '/system/bin/debuggerd', disabling >> 'debuggerd' >> [ 10.180494] init: cannot find '/system/bin/surfaceflinger', disabling >> 'surfaceflinger' >> [ 10.189167] init: cannot find '/system/bin/app_process', disabling >> 'zygote' >> [ 10.197073] init: cannot find '/system/bin/drmserver', disabling 'drm' >> [ 10.204255] init: cannot find '/system/bin/mediaserver', disabling >> 'media' >> [ 10.211996] init: cannot find '/system/bin/installd', disabling >> 'installd' >> [ 10.225883] init: cannot find '/system/etc/install-recovery.sh', >> disabling 'flash_recovery' >> [ 10.234762] init: cannot find '/system/bin/keystore', disabling >> 'keystore' >> [ 10.298698] init: untracked pid 92 exited >> /system/bin/sh: /system/etc/mkshrc[8]: id: not found >> @android:/ # >> >> It sounds to me that I'm missing something during the compilation but >> what ??? >> >> Any support would be more than welcome ! >> >> Jeremy. >> >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
