For whatever reason my analog inputs are all reading arbitrary values (i.e. 0.40xxxxx v to 0.83xxxx v ) on any given analog input, AIN 0-6 with little or no change. I am running Debian Wheezy with the Adafruit IO library, and everything else seems to work fine such as the PWM. If I input a voltage such as 1V I see a slight change in the readings, but it is very small. When I interrogate the inputs without anything connected I get these phantom voltage readings. I have never exceeded the 1.8V max on the analog inputs and have always left a little head room on the input voltage to be safe. I had been using the analog inputs without issue till recent, now I am stuck. Not sure what to try or look for, any suggestions would help me greatly.
Thanks, Tim -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
