Have you created a partition and a file system on the USB stick?
On Monday, April 21, 2014 5:27:30 AM UTC-5, Sanghyuk Lee wrote:
>
> hello
>
> I installed ubuntu 12.04 in emmc memory. because I need sdio interface
> for another device.
>
> But BBK cannot mount usb stick memory.
>
> When i insert usb stick memory in BBK , logo is as below.
>
>
> How can I mount usb stick memory beagle board.
>
>
> May it need udisk2?
>
> if needed udisk2 how and where can I get udisk2 in beagle bone
> ubuntu.
>
> I am waiting for your reply.
>
> thank u.
>
>
>
>
> buntu@ubuntu-armhf:/media$ [ 213.188718] sd 2:0:0:0: [sda] No Caching
> mode page present
> [ 213.194637] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [ 213.222809] sd 2:0:0:0: [sda] No Caching mode page present
> [ 213.228759] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [ 213.288317] sd 2:0:0:0: [sda] No Caching mode page present
> [ 213.294330] sd 2:0:0:0: [sda] Assuming drive cache: write through
>
> ubuntu@ubuntu-armhf:/media$
> ubuntu@ubuntu-armhf:/media$ dmesg | tail
> [ 213.184549] sd 2:0:0:0: [sda] Write Protect is off
> [ 213.184607] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
> [ 213.188718] sd 2:0:0:0: [sda] No Caching mode page present
> [ 213.194637] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [ 213.222809] sd 2:0:0:0: [sda] No Caching mode page present
> [ 213.228759] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [ 213.273099] sda: sda1
> [ 213.288317] sd 2:0:0:0: [sda] No Caching mode page present
> [ 213.294330] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [ 213.300852] sd 2:0:0:0: [sda] Attached SCSI removable disk
> ubuntu@ubuntu-armhf:/media$ [ 726.051209] tilcdc 4830e000.fb: timeout
> waiting for framedon
>
> ubuntu@ubuntu-armhf:/media$ ls -al
> total 8
> drwxr-xr-x 2 root root 4096 Apr 21 06:08 .
> drwxr-xr-x 23 root root 4096 Apr 21 07:02 ..
>
> /etc/udev/automount script
>
> Start at sdb to avoid system harddrive.
> KERNEL!="sd[a-z][0-9]", GOTO="media_by_label_auto_mount_end"
>
> #Import FS infos
> IMPORT{program}="/sbin/blkid -o udev -p %N"
>
> # Create a label
> ENV{dir_name}=="usbhd-%k"
>
> #Global mount options
> ACTION=="add", ENV{mount_option}="defaults, relatime"
>
> #Filesystem-specific mount options
> ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs",
> ENV{mount_option}=="$env{mount_option},utf8,gid=100,umask=002"
>
> #Mount the device
> ACTION=="add", RUN+="/bin/mkdir -p /media/%E{dir_name}", RUN+="/bin/mount
> -o $env{mount_options} /dev/%k /media/%E{dir_name}"
>
> # Clean up after removal
> ACTION=="remove", ENV{dir_name}!="", RUN+="/bin/umount -l
> /media/%E{dir_name}", RUN+="/bin/rmdir /media/%E{dir_name}"
>
> # Exit
> LABEL="media_by_label_auto_mount_end"
>
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
