On Mon, Apr 28, 2014 at 11:58 AM, Robert Nelson <[email protected]> wrote: >> >> I didn’t mean to upset you and I apologize for that. Here is a non book, >> hands on test that may help. Change the version of your u-boot on your >> SDCard and then reboot and see which version of u-boot is displayed on the >> debug console. I’m hoping that the u-boot version in the boot console will >> not change or I’ve got this completely wrong. > > As long as the bootrom finds a valid header in the MLO file, it'll > boot from that device. (the mmc interface wired to the eMMC has > priority over mmc interface wired to the microSD in the bootroom > order).
I should also note, one confusing thing about this. On the "orignial" beagle, we got into situations where MLO was loaded off NAND and the final u-boot.img was loaded from microSD. So MLO would print out weither it's booting u-boot.img from NAND/mmc. On the bbb, i haven't seen this case happen yet. (load MLO from eMMC, then load u-boot.img from microSD) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
