Thanks Charles, I tried that - i see CCC... on the serial line when I do that, which I believe means it's trying to boot from UART0. I've tried a few different SD cards that I know are property formatted. Any ideas?
Thanks, Chris On Sunday, April 27, 2014 at 2:48 PM, Charles Steinkuehler wrote: > On 4/27/2014 1:09 PM, cmicali wrote: > > > > Hi All, > > > > I mistakenly put a bad MLO on the FAT partition of the eMMC. This > > means the board won't boot at all, on power up there is nothing on the > > serial console and nothing happens. Since it's not able to boot from that, > > the SD card appears to be useless also. > > > > Any ideas how I can fix this? > > Hold the boot button, press then release the reset button, then release > the boot button. > > That should allow you to boot off the SD card and you can then copy a > good MLO file to the eMMC or reflash if needed. > > -- > Charles Steinkuehler > [email protected] (mailto:[email protected]) > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the Google > Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/ZxzFAkNuim8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] > (mailto:[email protected]). > For more options, visit https://groups.google.com/d/optout. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
