put . . .
*mmcdev=1 bootpart=1:2 mmcroot=/dev/mmcblk1p2 ro* into a file called uEnv.txt. Put this file into the main partition of the SD card. Also make sure the file has no Windows style line endings otherwise uboot will not be able to read the file properly. On Mon, Apr 28, 2014 at 10:32 AM, methos oldest <[email protected]>wrote: > Hi, > > I recently got my first BBB board and a 16GB microSD card. > I flashed my eMMC with this image: > https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz > I formatted my microSD card with FAT16. > > Now the BBB board boots properly and I can SSH into it. If I plugin the > microSD card after the board is booted, then it is mounted properly and I > can see all the available space as expected. > > However, if I plugin the microSD before the board boots, then I see that > USR0, USR1, USR2 are turned on. The board does not seem to boot. I am > guessing that it detects the presence of microSD and tries to boot from it. > > Is there someway to avoid that? > Should I set some flag somewhere in the boot sequence that bypass microsd > check? > > -M > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
