On 04/30/2014 10:21 AM, Robert Nelson wrote:
On Apr 30, 2014 8:16 AM, "Charles Steinkuehler"
<char...@steinkuehler.net <mailto:char...@steinkuehler.net>> wrote:
>
> On 4/30/2014 10:04 AM, Jerry Davis wrote:
> >
> > $ route -n
> >
> > Kernel IP routing table
> >
> > Destination Gateway Genmask Flags Metric Ref
Use
> > Iface
> > 192.168.7.0 0.0.0.0 255.255.255.252 U 0 0
0 usb0
>
> You have no default route. Try running:
>
> ip route add default via 192.168.7.1 dev usb0
>
> This would be setup by the usb0 entry in /etc/network/interfaces, but I
> think Robert changed the underlying network configuration in order to
> improve the boot speed. You probably have to edit a wicd config file or
> something...I don't use the USB port so I'm not sure.
The usb0 didn't change, it was statically defined so it didn't mess
with Boot times. eth0 on the other hand, with dhcp enabled it delayed
everything. Although I just switched eth0 to allow-hotplug vs auto.
Which fixed the main delay, but wicd was still a few seconds faster.
Doesn't changing eth0 from auto to allow-hotplug, mean that rebooting
with the cable plugged in will not automatically connect on eth0?
>
> --
> Charles Steinkuehler
> char...@steinkuehler.net <mailto:char...@steinkuehler.net>
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it,
send an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard%2bunsubscr...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to beagleboard+unsubscr...@googlegroups.com
<mailto:beagleboard+unsubscr...@googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
