I am having a simlar issue with my custom board based off the BBB. I think the issue is with using MMC1 the TRM for the am335x hints that the ROM uses Raw Mode therefore i believe it will jump to some sectors before your partion which starts at 2048... I was able to get MLO to start but i had the eMMC formatted incorrectly so MLO crashed. I formatted /dev/mmcblk0 as a vfat and this curpoted the other data on p1 I think...
So hope this could be cleared up on how to exactly format a eMMC that boots from MMC1 on a AM335x. On Friday, January 24, 2014 8:37:23 AM UTC-5, Martin Sperl wrote: > > Well - I have done all the above and even done a dd=/dev/zero > of=/dev/mmcblk1 bs=1M to erase the whole emmc. > > None of these steps help in booting only from SD automatically, so I shall > assume this is a HW issue and create an RMA... > > Thanks, Martin > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
