I am trying to get the Camera & DVI capes running by following the instructions in http://elinux.org/CircuitCo:BeagleBone_3.1MP_Camera#Software_Support.
To differentiate the capes there are 2 switches on each cape. Theoretically it doesn't matter what value each cape uses, as long as each cape has a unique value. I went through all 16 combinations of switches but could not find 1 that did not report a conflict. Sometimes the camera loaded OK, sometimes the DVI. When both capes had the same value neither camera or DVI loaded (as to be expected). THis is a typical part of the boot log +++++++++++++++++ [ 0.280950] bone-capemgr bone_capemgr.7: slot #0: No cape found [ 0.341494] bone-capemgr bone_capemgr.7: slot #2: No cape found [ 0.382158] bone-capemgr bone_capemgr.7: slot #3: BB-BONE-DVID-01 conflict P8.4 (#1:BB-BONE-CAM3-01) [ 0.391785] bone-capemgr bone_capemgr.7: slot #3: Failed verification [ 0.398558] bone-capemgr bone_capemgr.7: loader: failed to load slot-3 BB-BONE-DVID-01:00A3 (prio 0) [ 0.419657] /ocp/gpmc@50000000/camera: could not get #reset-cells for /ocp/rstctl@0 [ 0.427710] cssp-camera 18000000.camera: of_parse_phandle_with_args of 'reset' failed [ 0.555529] cssp-camera 18000000.camera: Loaded OK. ++++++++++++++++++ I'm using Angstrom v2012.12 - Kernel 3.8.13. I tried to load other versions by following the links in http://elinux.org/CircuitCo/BeagleBone#Image_Files but all failed with HTTP 404 errors. Any ideas? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
