Hello Charles!
I made an own Overlay, but it seems I made an error.
I use in my new file:
/* identification */
part-number = "cape-bone-myoverlay";
version = "00A1";
and
fragment@2 {
target = <&ocp>;
__overlay__ {
// !!!WARNING!!!
// gpio-of-helper &gpio pointers are off-by-one vs. the
hardware:
// hardware GPIO bank 0 = &gpio1
cape-myoverlay {
I use dtc: no error with:
dtc -@ -I dts -O dtb -o /lib/firmware/cape-myoverlay-00A1.dtbo cape-
myoverlay-00A1.dts
But when I try:
echo cape-myoverlay > /sys/devices/bone_capemgr.9/slots
I get:
bash: echo: write error: Invalid argument
Maybe you know where I made a mistake? Is it the own itendifier?
Or are my file wrong? Then I can upload maybe here to doublecheck.
Thank you!
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
