The video was stuck on "processing" for some reason. Here it is again: http://youtu.be/beVXOwo-RLk
On Saturday, May 10, 2014 12:03:26 AM UTC+2, Elias Bakken wrote: > > Hi, guys! I just completed a test script and a video to go along with it. > > Here is the video: > https://plus.google.com/112892827905040807193/posts/V9uaR4GNTCk > > And here is the script: > > https://bitbucket.org/intelligentagent/replicape/src/323c6c42b9448cd44a357c74b0527b058c975ef2/test/?at=Rev-A4 > > It is a python script, but it mostly pushes G-codes to the Redeem daemon. > I'm sending this to CircuitCo now and hopefully that will kickstart the > process! > > > On Friday, May 9, 2014 10:52:00 PM UTC+2, Charles Steinkuehler wrote: >> >> On 5/9/2014 3:30 PM, Jason Kridner wrote: >> > I am sure they are working it out (or already have) but I thought it >> > wouldn't hurt to hear some thoughts from community members. if for >> nothing >> > else than to give me something to run on the board to check it out >> other >> > than LinuxCNC. >> >> Can't you just run Elias' software? >> >> ...but for a testbed, just about anything that can twiddle I/O should >> work. I'd probably start off with some python code, and pull the PRU in >> if needed, probably with the code written in Forth just because. :) >> >> I also here there's some sort of node.js thing a lot of folks are all >> excited about, but it makes no sense to me. I grok C, Forth, and >> assembly, but I can't keep up with what all these youngsters are up to >> these days. Sure, it's all "beans" and "gems" until somebody pokes an >> eye out! ;-) >> >> -- >> Charles Steinkuehler >> [email protected] >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
