Any news? Micka, On Apr 2, 2014 2:31 PM, <[email protected]> wrote:
> All the options listed above; > > CAN > ODBII via SN1110 OBD to UART Interpreter > Mini-PCIe for 3G-LTE/GPS card > 6 axis accel and gyro > RTC > USB expansion for WiFi dongle > Bi directional GPIO for vehicle signals (Ignition in GPIO_0 wakeup domain) > > We are also in the process of verifying the end panels for the aluminium > assembly so it is a complete solution. > > On Wednesday, April 2, 2014 6:58:32 AM UTC+1, Eric wrote: > >> so what made it into the final production version? got a schematic or >> at least a BOM to share? >> >> Eric >> >> >> On Tue, Apr 1, 2014 at 2:28 AM, <[email protected]> wrote: >> >>> Hi, sorry for not responding when I said. >>> >>> The PCB's have now arrived from the manufacturer and the parts have >>> arrived from Farnell and Mouser. >>> The assembly and inspection is starting this weekend. >>> >>> I have to state that this is an initial low volume (10 off) production >>> to check the viability. >>> >>> We are testing the circuitry before we produce a full 3558/9 based board >>> with all the options of the cape populated. >>> >>> If there is enough interest in volume then we could produce for the >>> community. >>> >>> I am talking to the hardware engineer today so will get updates about >>> expected assembly completion. >>> >>> Sorry for the delay in updates. >>> >>> Marc >>> >>> >>> On Tuesday, April 1, 2014 6:34:59 AM UTC+1, Mickae1 wrote: >>> >>>> Hello, what is the status? >>>> >>>> Micka, >>>> On Mar 17, 2014 5:39 PM, <[email protected]> wrote: >>>> >>>>> Hi, yes we are progressing. We have just ordered the first batch of >>>>> boards and will be assembling and testing in the next 14 days. >>>>> We will be putting some more updates on our twitter feed soon... >>>>> @aSanCloud. >>>>> >>>>> I will contact you via your email address in the next couple of days >>>>> to give a more definitive date for you. >>>>> >>>>> Thanks >>>>> Marc >>>>> >>>>> On Saturday, March 15, 2014 12:07:38 PM UTC, Mickae1 wrote: >>>>>> >>>>>> Any news about it ? I would like to buy one .... >>>>>> >>>>>> Thx, >>>>>> >>>>>> >>>>>> On Sat, Feb 15, 2014 at 5:05 PM, <[email protected]> wrote: >>>>>> >>>>>>> I'm not sure of a pricepoint- we are working on a similar beta >>>>>>> product used to track delivery systems and i can get an chinese made >>>>>>> tracker with some of the capability you mention (except OBD-II info) for >>>>>>> under $40. Their devices have an onboard SIM for SMS alerts, etc. So >>>>>>> with >>>>>>> that in mind if we were able to use your SanCloud device with the same >>>>>>> capability along with OBD functionality for around $80-100 it would be >>>>>>> great. Are you considering kits fully assembled? Sorry if thats a silly >>>>>>> question we're new to open source hardware etc and am just wondering how >>>>>>> the license would affect other companies from using it in their >>>>>>> products? >>>>>>> Cheers! >>>>>>> >>>>>>> >>>>>>> On Wednesday, February 12, 2014 11:46:36 AM UTC-4, >>>>>>> [email protected]: >>>>>>>> >>>>>>>> What do people think the price point is for a cape that offers >>>>>>>> CAN >>>>>>>> OBDII >>>>>>>> accelerometer+gyro >>>>>>>> mini PCI-e (USB+SIM) >>>>>>>> GPIO >>>>>>>> LED's ? >>>>>>>> >>>>>>>> Thanks >>>>>>>> Marc >>>>>>>> >>>>>>>> On Monday, January 27, 2014 5:37:41 PM UTC, [email protected]: >>>>>>>>> >>>>>>>>> Hello, >>>>>>>>> I am part of a startup that has developed a system that is used to >>>>>>>>> analyse vehicles in they way they are driven and also track the >>>>>>>>> journeys. >>>>>>>>> >>>>>>>>> We are producing a cape to use for development of our next version >>>>>>>>> and thinking about offering it for sale to the open source >>>>>>>>> community. The >>>>>>>>> basics of the interface are: >>>>>>>>> CAN >>>>>>>>> ODBII via SN1110 OBD to UART Interpreter >>>>>>>>> Mini-PCIe for 3G-LTE/GPS card >>>>>>>>> 6 axis accel and gyro >>>>>>>>> RTC >>>>>>>>> USB expansion for WiFi dongle (possibly supporting 802.11p) >>>>>>>>> Bi directional GPIO for vehicle signals (Ignition in GPIO_0 wakeup >>>>>>>>> domain) >>>>>>>>> >>>>>>>>> And maybe some more. >>>>>>>>> >>>>>>>>> Are there any requests/requirements that you think might be of >>>>>>>>> benefit to make the cape more usable ? >>>>>>>>> >>>>>>>>> Any feedback appreciated. >>>>>>>>> >>>>>>>>> Kind Regards >>>>>>>>> Marc >>>>>>>>> >>>>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>> >>>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
