On Friday, January 31, 2014 4:34:51 AM UTC+11, Brad Andersen wrote: > > An update: > > For the A6 (Beaglebone Black) version, I connected U4 pin 1 (enable) back > to VDD_3V3AUX (same as A5C). It now shuts down correctly while on > battery. This was verified on two A6 BBB. > > The mystery is what causes the VDD_3V3A to hang up on the A6 version when > shutting down while on battery. >
Brad, Thank you for this post. I thought I was going madder than usual when the production units wouldn't turn off but the prototypes did! all it required was lifting pin 1 of U4 and soldering a wire-wrap wire to the power led anode (side furthest from the edge of the board) you have as they say "saved my bacon" Best Wishes, Darren -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
