Thanks! Looks like a stupid mistake, I'll check it out. On Tuesday, May 13, 2014 5:38:39 PM UTC+1, RobertCNelson wrote: > > On Tue, May 13, 2014 at 11:33 AM, James S <[email protected] <javascript:>> > wrote: > > > > Using the Beagleboard Debian release 2014-04-23, I'm trying to enable > SPI1 > > but I'm getting the following: > > root@beaglebone:/lib/firmware# dmesg |grep SPI > > [ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 > > capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN > > capemgr.enable_partno=BB-SPIDEV1-01 root=/dev/mmcblk0p2 ro > rootfstype=ext4 > > > I did a > > root@beaglebone:/lib/firmware# echo BB-SPIDEV1 > > > /sys/devices/bone_capemgr.9/slots > > root@beaglebone:/lib/firmware# > > > > > > followed by editing uEnv.txt on the SD card to add: > > optargs=quiet drm.debug=7 > > capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN > > capemgr.enable_partno=BB-SPIDEV1 > > > > After rebooting I get the message above. > > > > Whats my problem? > > James. > > Looks to me a copy/paste error, review the above. > "capemgr.enable_partno=BB-SPIDEV1-01" & "echo BB-SPIDEV1" > > Please clarify. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
