Hello, I just received my new element14 BeagleBone Black. I have little experience with Linux, and some experience with microcontrollers, so I got the BBB to tinker with. Right now my goal is to open a chrome browser in Linux. Since I do not have a physical HDMI connection to my monitor, I attempted to control the BBB using a VNC. These are the steps I took. 1) Open new BBB from box. 2) Install drivers 3) Connect usb to BBB and computer 4) Connect ethernet cable to BBB 5) Look around the website: http://192.168.7.2/Support/bone101/ 6) Google for resources to setup a VNC, e.g: http://digitaldiner.blogspot.sg/2013/05/quick-hint-for-beaglebone-black-user.html http://analogdigitallab.org/blogs/beaglebone-black-see-graphics-vnc http://www.youtube.com/watch?v=Z-XbJNKx4gk http://analogdigitallab.org/blogs/beaglebone-black-see-graphics-vnc 7) Set up a SSH connection to the BBB (not that I have no microSD card installed at the moment, and everything I have done is as described (e.g. no flashing of OS because isn't debian already preinstalled)
So for most of them, the first step was to install any updates, e.g opkg update However, I get a message: opkg: command not found as shown in the screen shot. This has stumped me and I do not know how to proceed further. Could any kind soul please help? Thanks 2) Install any updates: opkg update 2) Install any updates: opkg updatin <https://lh5.googleusercontent.com/-AMiHHKiEKtA/U3bkyVQB6MI/AAAAAAAAAWY/Vkz6IxfnRII/s1600/BBB.jpg> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
