On Wed, May 21, 2014 at 12:41 PM, Gerald Coley <[email protected]> wrote: > JTAG is used here all the time. But we use higher in JTAG devices and CCS > for debugging. Only JTAG component is one connector. Voltage is 3.3V.
By "components" I meant the BBB, the JTAG interface and the system running the software debugger/toolchain. Right now I'm not sure if: 1) I messed up soldering the header onto the BBB -- don't think so, looks perfect under magnification. 2) Whether the issue is with my Bus Blaster v3c. The instructions/adapter I'm using are for the Flyswatter2 but it uses an identical ARM20 pinout to the BusBlaster. 3) Related to my particular OpenOCD/libusb/Linux install. Hence I was wondering if there was someone local to me using the Flyswatter2 JTAG with the BBB, according to the Tincan tools site, it works, at least using OpenOCD 0.7 I'm aware that there are more expensive JTAG tools available. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
