Serious problem with this release - here~s the df on it right after installÇ Filesystem 1K-blocks Used Available Use% Mounted on rootfs 1715936 1503116 123988 93% / udev 10240 0 10240 0% /dev tmpfs 101700 596 101104 1% /run /dev/disk/by-uuid/b3684199-af26-4884-a407-097e769cd863 1715936 1503116 123988 93% / tmpfs 254248 0 254248 0% /dev/shm tmpfs 254248 0 254248 0% /sys/fs/cgroup tmpfs 5120 0 5120 0% /run/lock tmpfs 102400 0 102400 0% /run/user /dev/mmcblk0p1 98094 73876 24218 76% /boot/uboot does not leave much room does it
On Wednesday, May 21, 2014 11:41:56 AM UTC-7, Jason Kridner wrote: > > http://beagleboard.org/latest-images/ now has the 2014-05-14 image linked > and CircuitCo is making the switch to flashing this on the board thanks to > improvements in the flasher. Primarily, the flasher now shuts the board > down after boot, so the LEDs will be all off, rather than all on when the > flash completes. Note that the next revision will likely also change the > LED flashing patterned during the flashing operation. > > See notes at > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-05-14 and reply > to the list if you have any issues/questions/doubts/etc... > > I also made a small blog post at > http://beagleboard.org/blog/2014-05-21-beaglebone-black-image-update. > > (and don't forget the bug report site: > http://bugs.elinux.org/projects/debian-image-releases) > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
