Mike, Not to worry, with practice your Linux will improve, just as your English has with practice and use. In both cases we all start with zero competency as a complete newb. As for the steps, I asked the same question not long ago here on this list. here's a link to the question and answer in the list archive.
https://groups.google.com/forum/#!topic/beagleboard/TKqSh4VFW_E note, the pre rev c black has only 2GB of flash onboard which the image pretty well fills the Flash as is. All the best with your venture into Linux, best OS out there! Eric On Fri, May 30, 2014 at 1:55 PM, <[email protected]> wrote: > Hello > I recently flashed the BeagleBone Black 2GB eMMc card with Debian version > 2014-05-15 and resized the partition using "fdisk". The BBB will crash > after about 10 minutes of operation. I'd like to be able to boot via the > eMMc and use the space on the SD Card as part of the eMMc partition. Does > anyone have the steps documented as I may not be completing the resizing > correctly. Carefull, I'm a newby and only speak English; not Linux! > Thanks in advance for any help you can provide. > > Mike > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
