ok, so faster processor and memory and a few tweaks on the power path (that allow for and enable faster memory). anything else? sounds like an inexpensive high-performance version of the white could be build cheaply by leaving parts unpopulated on the black. The usb serial chip isn't really necessary since the software enhancements now make it show up as a usb "gadget". Kinda wondering what the white offers that the black with no framer or eMMC would not?
Eric On Tue, Jun 3, 2014 at 12:57 PM, Gerald Coley <[email protected]> wrote: > DDR3L? PMIC configuration? > > Gerald > > > > On Tue, Jun 3, 2014 at 2:53 PM, Eric Fort <[email protected]> wrote: > >> If someone assembled a beaglebone black but left off the eMMC and HDMI >> framer chips what would the differences be between that and the beaglebone >> white? (other than the white has usb serial and usb jtag which the black >> lacks) >> >> Thanks, >> >> Eric >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
