Are you seeing the same issue if you use a Debian boot SD card? Are you able to see any serial output?
The new RS-232 Cape (rev B) does not have any EEPROM on it. -Hieu On Fri, Jun 6, 2014 at 11:41 AM, <[email protected]> wrote: > > I had purchased a number of RS232 capes ( > http://elinux.org/CircuitCo:RS232_Cape_RevB Rev A1) before the Rev B came > out, I also have BBB's rev A6A, B, and C. > I'm needing to boot from the SD card, I've installed Angstrom on the SD > card and everything works well except when I go upto Rev C on the BBB. The > BBB refuses to boot from the SD card only when the cape is installed. > On the A6A and B with the cape installed everything works as expected, and > if I remove the cape it boots from the SD on Rev C. > > I have been unable to get my hands on the new revision of the cape (sold > out). My only thought is the eeprom is not addressing the BBB properly and > somehow making it ignore the SD card. > > So my question is actually two: > Has anyone else experienced this problem? > and does anyone have the new cape and would be willing to send me a hex > dump of the eeprom? > > Thanks. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
