Hi All, I don't remember if it is the same for the BBB as the original BB, but for win ce you needed to format the card with the HP USB utility and then the 1st file that was copied to the card had to be the mlo. This way it was in the proper location. Yes, otherwise the system would not boot.
Hope that helps. If I find it's different I'll let you know. Matt On Monday, June 9, 2014 1:04:16 AM UTC-5, [email protected] wrote: > > Dear friend, > I also facing the same problem. Just send me if you got the solution. > thanks in advance... > > On Tuesday, 8 October 2013 12:44:58 UTC+5:30, Ali Asadzadeh wrote: >> >> Dear all >> I have loaded a 4GB SD card with the MLO and EBOOTSD.nb0 and NK.bin that >> comes with the Demo package (AM335X_BeagleBoneBlack_WEC7_BIN_V0131),Also I >> have formatted the card with Fat32 and 4096 byte sectors (using windows >> foarmt), and I have used the TI SD card utility for flashing the SD card, >> Also I have pushed the user button before power up, >> But noting happens!!! >> when I power the board up the leds won't flash, and there is no activity >> on the Serial header, So I think it's a boot problem, How can I be sure >> that the MLO is in the first sector of the SD card? >> I have loaded angstrom, android and ubunto succsfuly on BeagleBone Black, >> I just want to compare what Win CE has to offer,So If you have >> booted successfully the Adeno Win CE please help me too, >> >> Regards >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
