Hi all, This is a simple question and it is possible that it's been answered elsewhere, but I have been unable to find a clear explanation. I'm using a BeagleBone Black in conjunction with another piece of hardware that has its own processor. If the BeagleBone gets hung up and communication between the two ceases, I want to be able to reset the BeagleBone. Can I simply ground the SYS_RESETn pin for a set amount of time in order to accomplish this? If so, what would a safe amount of time be?
I've seen many examples where the SYS_RESETn pin is used to enable other devices, but I'm still unclear on whether or not I can reset the board this way. There is another topic posted today about doing a cold reset, but I would prefer to keep power to the BeagleBoard because I am using the 3.3V rail to power another device. Thanks in advance, -Mike -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
