On Thu, Jun 12, 2014 at 3:09 PM, Charles Kerr <[email protected]> wrote: > I was curious if anyone has insight into the issue I am having. > > I have setup LinuxMintDebian in a VMWare session on my Mac. I then went and > installed gcc/g++ with an apt-get install build-essential > > I then went here Robert's kernel build and did the following: > > dpkg --add-architecture i386
did you actually install the lib's listed? sudo apt-get update ; sudo apt-get install libc6:i386 libstdc++6:i386 libncurses5:i386 zlib1g:i386 > wget -c > https://releases.linaro.org/14.03/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux.tar.xz > tar xf gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux.tar.xz > export > CC=`pwd`/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux/bin/arm-linux-gnueabihf- > > However, when I do the test >> >> ${CC}gcc --version > > > I get the following: > > /root/toolchain/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux/bin/arm-linux-gnueabihf-gcc: > No such file or directory > > Yes, I can do an ls and see the file at the location it specifies: > ls > /root/toolchain/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux/bin/arm-linux-gnueabihf-gcc > > Gives this: > /root/toolchain/gcc-linaro-arm-linux-gnueabihf-4.8-2014.03_linux/bin/arm-linux-gnueabihf-gcc > > The wiki indicates an error is the libraries not loaded, but I got no error > from the dpkg command that was indicated in the wiki > > Is there something else I missed? Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
