Hi Russ, I also had problems with powered USB hubs as you mentioned with the Debian 3.14-boneXX branch. My solution per Robert's advice was to use the Debian 3.8-bone53 branch and I used a non powered hub believe it or not from Staples. It is a Staples brand Model No. 36202 (Renasas USB bridge). Everything is fine with dmesg and my Logitech C920 camera, RocketFish Bluetooth/USB adaptor, Logitech K760 (Apple compatible) BT keyboard are working fine. I would like to go back and visit the issue with a powered USB hub but the two I tried didn't work at the time. If you want anything from dmesg I'll print it out for you.
I'm also using an LCD 7 cape. If Robert is still monitoring this thread I couldn't find touchscreen xinput_calibration program for Debian 3.8-bone53. It seems it was available in -bone37 & 38. Did I miss it? Mike Carr On Thursday, June 12, 2014 12:53:36 PM UTC-7, Russ Hall wrote: > > My WiFi antennea seems to need to be plugged directly into the BBB to > work. In the powered USB hub it isn't recognized on boot. Ditto for the > Logitech 920 webcam. Can I make a USB female-female adapter to plug one > device into the USB client (mini) port on the BBB? Will that work? What are > the rest of you doing about this limitation? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
