On Tue, Jun 17, 2014 at 11:19 AM, Michel Lavoie <[email protected]> wrote: > Hi, > > I currently have 3 BBB running as web servers, media center, file syncing > tools, etc. and they used to be on Arch Linux. I recently switched one of > them to Debian (3.8.13-bone47), because I was curious, and I'm struggling > with the following problem: > > One of the BBB-Arch has several NFS exports which are used by other machines > (BBB-Arch, RPi-Rasbmc, PC-Ubuntu, PC-Manjaro, etc...). I've never had any > trouble mounting those NFS shares from any other machine, either manually or > automatically (at boot from an fstab entry). > > I've added the following entry to fstab in BBB-Debian and using "sudo mount > -a" works fine. However when I restart the board it doesn't get mounted > automatically. > > bbbdata:/EDMS /home/michel/edms nfs rsize=8192,wsize=8192,timeo=14,_netdev 0 > 0 > > I'm a bit at a loss here, I went through many guides and wiki entries and > couldn't find any solution. I also tried using the server's IP address > instead of the hostname (from /etc/hosts), but the results were the same. > > I did notice that it takes about 29 seconds for eth0 to become ready (from > dmesg), perhaps this is too long for the NFS automatic mount? > > [ 29.122963] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > Any help would be greatly appreciated!
I don't have any issues with the 30 second timeout, although i'm still forcing nfsvers mode 3. From: /etc/fstab 192.168.1.95:/mnt/usb0/ /mnt/farm nfs rw,nfsvers=3,rsize=8192,wsize=8192 0 0 I have about 20 arm boards, connecting to that nfs server. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
